Used and tested network equipment in Tucson
Refurbished and lab-tested gear from our installs and trade-ins. Inventory changes—call to confirm availability.
Tucson delivery available.
Questions? 520-301-4144
Ubiquiti Unifi AP AC PRO Wireless Access Point UAP-AC-PRO 802.3af PoE
Model highlights
- 6-stream WiFi 5 (802.11ac) access point
- Dual-radio 2.4 GHz and 5 GHz
- 250+ connected devices supported
- About 1,500 ft² coverage (typical; layout and RF environment vary)
- Status LED ring around the UniFi logo
- Compact round form factor — Ø196.7 mm
- 802.3af PoE powered (injector included with these units)
All units have been test-adopted on our UniFi controller, verified in service, and upgraded to current supported firmware before sale. 90-day warranty. Not in original packaging. Units may have minor blemishes.
Includes power supply.
$100 (plus tax)
Call to confirm availability.
QDAX Two-Way RF Amplifier
Model highlights
- 750 MHz bandwidth two-way RF distribution amplifier
- 36 dB forward gain, 16 dB reverse (return) gain
- AC adapter included
Features
- Two-way design: amplifies downstream (forward) and upstream (reverse) on the same coax for TV/QAM plus cable-modem return
- 750 MHz RF bandwidth suited for extended cable spectrum distribution
- 36 dB forward gain to drive multiple splits or long drops from a single headend/closet location
- 16 dB reverse gain to maintain clean upstream levels to the provider
- AC adapter included for wiring closets and MDU installs
Units are tested and verified for operation before sale. 90-day warranty.
AC adapter included. Contact us for stock.
$249 each (plus tax)
Call to confirm availability.
Blonder Tongue BIDA-75A-43 Broadband Indoor Distribution Amplifier
Model highlights
- 49–750 MHz forward bandwidth, 43 dB forward gain
- Integrated two-way path: active return 5–36 MHz (jumper-configurable)
- Indoor distribution amp for CATV, SMATV, and MATV
- AC adapter included
Features
- Broadband indoor distribution amplifier for analog and digital cable/QAM over coax
- Front-panel gain and slope (tilt) controls for flat in-band response
- Built-in RF test points on input and output for signal monitoring without disconnecting cables
- Hybrid push-pull / power-doubling output topology for high output with low distortion
- Large heat sinks for stable continuous operation in wiring closets and IDF locations
- Field-changeable jumpers configure passive vs. active return path operation
- Designed for driving long cable runs and multiple receivers from one headend feed
Specifications
- Forward frequency range: 49–750 MHz
- Forward gain: 43 dB (model BIDA-75A-43)
- Return path: 5–36 MHz (integrated; configuration via internal jumpers)
- Power: 26 VAC, 1.7 A, 50/60 Hz (per factory panel; confirm with included transformer)
- Application class: indoor broadband distribution (residential/commercial SMATV-MATV)
Units are tested and verified for operation before sale. 90-day warranty.
AC adapter included. Contact us for stock.
$249 each (plus tax)
Call to confirm availability.